Influence of ply misalignment on form error in the manufacturing of CFRP mirrors with different layup sequences

Chunmei Zeng; Congshan Rui; Suodong Ma; Peiji Guo

doi:10.1117/12.2504964

11 January 2019 Influence of ply misalignment on form error in the manufacturing of CFRP mirrors with different layup sequences

Chunmei Zeng, Congshan Rui, Suodong Ma, Peiji Guo

Author Affiliations +

Proceedings Volume 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 108370F (2019) https://doi.org/10.1117/12.2504964
Event: Ninth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2018), 2018, Chengdu, China

Abstract

The ply angle misalignment has a significant influence on the surface accuracy of the carbon fiber reinforced polymer (CFRP) composite mirrors after curing. In order to investigate the sensitivity of two arrangement methods of layup sequences to the form error after cure, the finite element method (FEM) was used to discuss the influence. 18 different layup sequences have been investigated: 500 models with a normal distribution of random angular alignment errors were generated for each layup sequence, and the mirror’s deformation was calculated to obtain the values of mean M and standard deviation a of the surface error after curing. The results reveal that as the number of plies increases, the curing deformation of the two arrangement methods will gradually decrease; with the same number of plies at different increment angle, the “Optimized” sequences reduce M by about 8% to 16% relative to the clockwise sequences, which reduces a by about 9% to 22%. The improvement is obvious, especially when the number of plies is no larger than 24. This shows that the regularized stiffness coefficient method (corresponding to the “Optimized” sequences) can effectively reduce the form error compared to clockwise sequences; the general trend is that the smaller the optimization target value, the smaller the deformation; this positive correlation is established with a high probability under the same number of layers and the same increment angle, or when there is a large difference between the target values. The regularized stiffness coefficient method can get the layup sequence accurately, and thus has certain theoretical basis and manufacturing advantages. It is, therefore, a layup sequences design method worthy of study.

Citation Download Citation

Chunmei Zeng, Congshan Rui, Suodong Ma, and Peiji Guo "Influence of ply misalignment on form error in the manufacturing of CFRP mirrors with different layup sequences", Proc. SPIE 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 108370F (11 January 2019); https://doi.org/10.1117/12.2504964

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Mirrors

Error analysis

Finite element methods

Photovoltaics

Carbon

Manufacturing

Composites

Show All Keywords

Keywords/Phrases

Search In:

Publication Years