Paper
12 March 2019 Design and theory analysis of infrared detector
Author Affiliations +
Proceedings Volume 11023, Fifth Symposium on Novel Optoelectronic Detection Technology and Application; 110231C (2019) https://doi.org/10.1117/12.2521432
Event: Fifth Symposium on Novel Optoelectronic Detection Technology and Application, 2018, Xi'an, China
Abstract
In order to achieve the purpose of far detective distance、relatively high anti-jamming performance, the new missile requirements of infrared detector with high detectivity and low signal-to-noise(SNR), fast cooling-down. Based on the mechanism of infrared detector and design theory, combining technology practice, the indium antimonide(InSb) detector chip passivation film and the antireflection coating design and manufacturing are analyzed, while the Principe of multi-layer structure of the fast cooling-down cooler tubes are analyzed. Its detectivity is beyond 3x1010 cm·Hz1/2·W-1, the current responsivity over 0.24A/W, the impedance at zero bias voltage beyond 500KΩ, cooling-down time less than 3 seconds. The specifications meet the requirement for air-defense missile, and out-door the infrared detector has been demonstrated successfully. It can realize the requirement of missile detection distance is greater than 5km.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiu-qiang Li "Design and theory analysis of infrared detector", Proc. SPIE 11023, Fifth Symposium on Novel Optoelectronic Detection Technology and Application, 110231C (12 March 2019); https://doi.org/10.1117/12.2521432
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared detectors

Missiles

Sensors

Infrared sensors

Reticles

Antireflective coatings

Refractive index

Back to Top