Paper
11 September 1989 High Modulus Layers As Protective Coatings For 'Window' Materials
R. J. Hand, J. E. Field, S. van der Zwaag
Author Affiliations +
Abstract
Theoretical and experimental studies have been made on the effect of thin hard coatings on the stress fields generated by indentation and impact onto a flat half space. The theoretical work uses finite element techniques and shows that a thin hard coating can have a significant effect on the maximum tensile stress generated in the substrate providing there is a good bond at the coating/substrate interface. As it is technically difficult to deposit layers of thickness greater than a few microns without residual stresses causing debonding and peeling; double layer and multilayer systems have also been examined. Hertzian indentation on hard carbon coated germanium has shown that such coatings do offer protection against indentation damage. High speed liquid impact on coated germanium and zinc sulphide has shown, however, that although the quasi-static performance of the material may be improved the impact resistance of the coated material is not significantly affected. Reasons for this are discussed. In conclusion, although it is still to be hope that coatings that do improve the impact performance of materials can be manufactured, current coatings offer better protection against handling damage rather than against impact.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. J. Hand, J. E. Field, and S. van der Zwaag "High Modulus Layers As Protective Coatings For 'Window' Materials", Proc. SPIE 1112, Window and Dome Technologies and Materials, (11 September 1989); https://doi.org/10.1117/12.960771
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zinc

Chemical elements

Liquids

Interfaces

Solids

Carbon

Hard coatings

RELATED CONTENT


Back to Top