Paper
5 November 2020 Design and splicing of autocollimation target for space camera
Xin Sun, Yong-jian Wu, Yong-li Hu, Tian-jin Tang, Yong Liu
Author Affiliations +
Proceedings Volume 11570, AOPC 2020: Telescopes, Space Optics, and Instrumentation; 1157007 (2020) https://doi.org/10.1117/12.2576023
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China
Abstract
In order to realize MTF detection without collimator, first establish an auto collimate detect system, analysis its principles and requirements. Then, simplify its optical path , give the formula of reflexed direction angle of target fringes, give the formula of its effect on MTF. Compare the coaxial system and off-axial system: target deflection caused the test MTF to drop to 87.9% of the actual MTF. Give the design method of autocollimation target, using this method, for an off-axis camera, the MTF test error due to target deflection can be reduced from 12.1% to a negligible level. Finally, discusses the splicing of detector and target, analysis the effect of filter on focal plane, propose the confocal design and splicing.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xin Sun, Yong-jian Wu, Yong-li Hu, Tian-jin Tang, and Yong Liu "Design and splicing of autocollimation target for space camera", Proc. SPIE 11570, AOPC 2020: Telescopes, Space Optics, and Instrumentation, 1157007 (5 November 2020); https://doi.org/10.1117/12.2576023
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Modulation transfer functions

Target detection

Sensors

Autocollimation

Mirrors

Imaging systems

RELATED CONTENT


Back to Top