Detailed Monte Carlo simulation of energy integrating and photon counting semiconductor detectors

Hitalo R. Mendes; Alessandra Tomal

doi:10.1117/12.2607891

4 April 2022 Detailed Monte Carlo simulation of energy integrating and photon counting semiconductor detectors

Hitalo R. Mendes, Alessandra Tomal

Proceedings Volume 12031, Medical Imaging 2022: Physics of Medical Imaging; 120314Q (2022) https://doi.org/10.1117/12.2607891
Event: SPIE Medical Imaging, 2022, San Diego, California, United States

Conference Poster

Abstract

X-ray imaging techniques widely employ semiconductor detectors. Energy integrating (EI) detectors are used in digital radiography and photon counting (PC) in CT. This work aims to implement a detailed Monte Carlo modeling of these sensors. The model was divided into radiation interaction and electron-hole pairs (EHP) creation and dispersion. The PENELOPE code simulated the radiation transport. In each electron interaction, the absorbed energy was converted into EHP considering the pair creation energy and the Fano factor. The detection position was sampled using a Gaussian distribution, where the standard deviation was from the Einstein diffusion equation. The Hetch equation models the charge trapping. In the PC mode, the photon was counted if the energy deposited was higher than a threshold (ethr ). Monoenergetic pencil beams between 10 and 100 keV were simulated, with 10⁷ histories. The detector material was cadmium tellurite, with 50 μm pixel size, whose thicknesses, applied electric field, and ethr vary, respectively from 250 to 1000 μm, 0.01 to 1 V/μm, and from 1 to 50 keV. The results show a wider detector response as the beam energy increases. For energies above 32 keV the fluorescence is greatly responsible for this spread. The detector’s efficiency increases with the sensor thickness and decreases with the photon energy. Charge trapping decreases the efficiency up to 43,53%. For the PC mode, an ethr increase yields a narrower detector response and increases the image noise. This study provides a detailed detector modeling and, consequently, insight into the imaging system’s fundamental limitations.

Citation Download Citation

Hitalo R. Mendes and Alessandra Tomal "Detailed Monte Carlo simulation of energy integrating and photon counting semiconductor detectors", Proc. SPIE 12031, Medical Imaging 2022: Physics of Medical Imaging, 120314Q (4 April 2022); https://doi.org/10.1117/12.2607891

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available