Presentation + Paper
27 May 2022 RF dielectric measurements on engineering fluids for jet impingement cooling
Author Affiliations +
Abstract
Certain engineering fluids are useful to dissipate heat emitted from high power silicon dies. In jet impingement cooling, whereby a jet of fluid is directly sprayed on the device being cooled, the electrical characteristics of the cooling fluids are an important consideration for the cooling design of radio frequency amplifiers. To prevent abnormal behavior and to ensure that modeling and simulation accurately predict the amplifier’s performance, the fluid must have the proper dielectric properties to guarantee sufficient insulation under various temperatures and conditions. This study focuses on determining the relative permittivity and the electric loss tangent of four types of engineering fluids: NovecTM 7300, NovecTM 7500, FluorinertTM FC-40, and FluorinertTM FC-3283 from 500 MHz to 20 GHz across 0℃ (more accurately 1°C) to 50°C at 10°C intervals. The findings of this study indicate that both FC fluids had a lower relative permittivity and loss tangent values than the Novec fluids. These results suggest that the FC fluids would be better suited for amplifier cooling since they are less conductive than the Novec fluids.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yash Patel, Charles Ringer, and Andrew Werdowatz "RF dielectric measurements on engineering fluids for jet impingement cooling", Proc. SPIE 12108, Radar Sensor Technology XXVI, 121080H (27 May 2022); https://doi.org/10.1117/12.2627059
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dielectrics

Water

Electronics

Liquids

Cooling systems

Temperature metrology

Heatsinks

Back to Top