Presentation + Paper
13 June 2023 Multiplexable fiber Bragg grating flow sensor enabled by femtosecond laser
Kehao Zhao, Shuda Zhong, Yuqi Li, Zayed Ahmed, Masahiro Kawaji, Kevin P. Chen
Author Affiliations +
Abstract
This paper presents a technique for measuring gas flow velocity using femtosecond laser-induced active fiber Bragg grating (FBG) sensors. When the in-fiber high-power laser is turned off, a small volume of gas in the flow stream is heated 0.05 °C to 1 °C above the ambient temperature using an electrical pulse heater. The temperature change of the gas is measured by the FBG sensors, allowing for the calculation of flow velocity based on time-of-flight measurements. Conversely, when the high-power laser is activated, the FBG sensors can be significantly heated by 23.5 °C to 281.9 °C above the ambient temperature through an energy conversion coating that converts leaked light into heat. The flow rate can be calculated according to how much the sensors’ temperature drops. The experimental results show that Type-II FBG sensors can be used as highly multiplexable active optical sensors for both temperature and flow sensing with better response times than thermocouple devices.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kehao Zhao, Shuda Zhong, Yuqi Li, Zayed Ahmed, Masahiro Kawaji, and Kevin P. Chen "Multiplexable fiber Bragg grating flow sensor enabled by femtosecond laser", Proc. SPIE 12532, Optical Waveguide and Laser Sensors II, 125320H (13 June 2023); https://doi.org/10.1117/12.2666658
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Fiber optics sensors

Velocity measurements

Optical fibers

Back to Top