Paper
25 September 2023 Simulation construction and analysis of offshore wind power AC/DC aggregation and transmission topology
Chenxiao Zhang, Wanyue Zhang, Xi Liu, Mengyao Liang, Yongqiang Zhu
Author Affiliations +
Abstract
This article first briefly introduces the control principle of flexible DC transmission, and focuses on the analysis of the dual-loop vector control used in the simulation model of this article. Then, based on the existing knowledge, the simulation model was built in two cases: namely, the DC output after the multi-machine AC integration and the single-machine DC output. In the first model, an ideal AC voltage source is used to simulate the AC power generated by the wind farm after the collection, and then the rectifier part is connected, and then the DC-DC boost is directly performed, and finally the load is connected to the DC high-voltage output side. The output power can be controlled by the load; in the second model, a permanent magnet synchronous motor is used to simulate the output of AC power instead of the fan. After that, the rectifier part is connected to the first model, and then the DC-DC boost is directly performed, and finally the output side is directly connected Ideal DC power supply. The ideal DC power supply here is equivalent to an infinite ideal DC power grid.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Chenxiao Zhang, Wanyue Zhang, Xi Liu, Mengyao Liang, and Yongqiang Zhu "Simulation construction and analysis of offshore wind power AC/DC aggregation and transmission topology", Proc. SPIE 12788, Second International Conference on Energy, Power, and Electrical Technology (ICEPET 2023), 127881Z (25 September 2023); https://doi.org/10.1117/12.3004620
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wind energy

Device simulation

Control systems

Power supplies

Fluctuations and noise

Mathematical modeling

MATLAB

Back to Top