24 August 2024Autocompatibility testing during vacuum test campaign of the PLATO flight model cameras
Claudio Arena, Nicolas Gorius, Gianalfredo Nicolini, Alessio Aboudan, Jose L Alvarezb, Francesco Borsa, Giacomo Cherchi, Cydalise Dumesnil, Yves M.E Levillain, Christian Olivetto, Isabella Pagano
Claudio Arenahttps://orcid.org/0000-0002-0319-8791,1 Nicolas Gorius,2 Gianalfredo Nicolini,3 Alessio Aboudan,4 Jose L Alvarezb,5 Francesco Borsa,6 Giacomo Cherchi,7 Cydalise Dumesnil,8 Yves M.E Levillain,9 Christian Olivetto,8 Isabella Pagano1
1INAF - Osservatorio Astrofisico di Catania (Italy) 2INAF – Osservatorio Astrofisico di Catania (Italy) 3INAF - Osservatorio Astrofisico di Torino (Italy) 4Universita' di Padova (Italy) 5European Space Research and Technology Ctr., European Space Agency (Netherlands) 6INAF - Osservatorio Astronomico di Brera (Italy) 7INAF - Osservatorio di Astrofisica e Scienza dello Spazio Bologna (Italy) 8IAS Univ. Paris-Saclay (France) 9European Space Research and Technology Ctr. (Netherlands)
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
PLATO is a European Space Agency medium class mission, whose launch is foreseen for 2026. Its primary goal is to discover and characterize terrestrial exoplanets orbiting the habitable zone of their host stars. This goal will be reached with a set of 26 wide field-of-view cameras mounted on a common optical bench. The PLATO camera flight models (FMs) are being tested at three different test-houses, namely the Netherlands Institute for Space Research (SRON), Institut d'Astrophysique Spatiale (IAS) and Instituto Nacional de Técnica Aeroespacial (INTA). Here we present the results of autocompatibility testing obtained during cryogenic-vacuum tests campaigns on the PLATO Camera 'Normal' FMs. The autocompatibility testing aims to analyse possible interferences on the CCD readout signal due to camera operations. Camera operations that could be potential causes of interference are identified in the Thermal control system (TCS) heater lines pulses, and multiple CCD readouts (relevant for PLATO 'Fast' Cameras only).
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Claudio Arena,Nicolas Gorius,Gianalfredo Nicolini,Alessio Aboudan,Jose L Alvarezb,Francesco Borsa,Giacomo Cherchi,Cydalise Dumesnil,Yves M.E Levillain,Christian Olivetto, andIsabella Pagano
"Autocompatibility testing during vacuum test campaign of the PLATO flight model cameras", Proc. SPIE 13092, Space Telescopes and Instrumentation 2024: Optical, Infrared, and Millimeter Wave, 130924O (24 August 2024); https://doi.org/10.1117/12.3020694
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Claudio Arena, Nicolas Gorius, Gianalfredo Nicolini, Alessio Aboudan, Jose L Alvarezb, Francesco Borsa, Giacomo Cherchi, Cydalise Dumesnil, Yves M.E Levillain, Christian Olivetto, Isabella Pagano, "Autocompatibility testing during vacuum test campaign of the PLATO flight model cameras," Proc. SPIE 13092, Space Telescopes and Instrumentation 2024: Optical, Infrared, and Millimeter Wave, 130924O (24 August 2024); https://doi.org/10.1117/12.3020694