Paper
6 May 2024 Design and realization of an interface circuit for a consumption sensor
Author Affiliations +
Proceedings Volume 13107, Fourth International Conference on Sensors and Information Technology (ICSI 2024); 131070H (2024) https://doi.org/10.1117/12.3029402
Event: Fourth International Conference on Sensors and Information Technology (ICSI 2024), 2024, Xiamen, China
Abstract
In this paper, an interface circuit based on aircraft consumption sensor is proposed. Sinusoidal AC excitation signal with a peak value of 10V± 20% to the ground and a frequency of 4000HZ±10HZ is applied to the consumption sensor, and the excitation signal is monitored. At the same time, the envelope signal with a maximum amplitude of 1.2-1.3V output by the consumption sensor is collected. The envelope number is demodulated by diode detection circuit, proportional amplifier circuit and hysteresis comparator circuit, so as to realize the monitoring of aircraft engine fuel consumption. The pilot can manage aircraft fuel according to the consumption. The method has been verified by practical engineering.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Li Ai, Jingtao Guo, and Jun Zhao "Design and realization of an interface circuit for a consumption sensor", Proc. SPIE 13107, Fourth International Conference on Sensors and Information Technology (ICSI 2024), 131070H (6 May 2024); https://doi.org/10.1117/12.3029402
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Diodes

Signal detection

Power consumption

Bandpass filters

Circuit switching

Interfaces

Back to Top