Optimization method for equipment maintenance plan for power supply service command

Junfeng Qiao; Aihua Zhou; Lin Peng; Yun Chen; Zhonghao Qian; Min Xu; Sen Pan; Pei Yang

doi:10.1117/12.3052783

11 December 2024 Optimization method for equipment maintenance plan for power supply service command

Junfeng Qiao, Aihua Zhou, Lin Peng, Yun Chen, Zhonghao Qian, Min Xu, Sen Pan, Pei Yang

Proceedings Volume 13445, International Conference on Electronics, Electrical and Information Engineering (ICEEIE 2024); 134452S (2024) https://doi.org/10.1117/12.3052783
Event: International Conference on Electronics. Electrical and Information Engineering (ICEEIE 2024), 2024, Haikou, China

Abstract

The goal of power supply service command is to solve the problems encountered by users during the electricity consumption process with high efficiency. Users often encounter equipment failures, load exceeding limits, voltage instability, and other issues during the electricity consumption process, and equipment failures are the most frequent events that occur during the electricity consumption process. The existing equipment maintenance process is analyzed by decision-makers from the power supply service command center based on the received user repair needs, and then work tasks are assigned to maintenance service personnel. However, this mode has the problem of excessive manual intervention and low efficiency. The article proposes an optimization method for equipment maintenance plan for power supply service command, analyzing the equipment maintenance plan from the perspectives of driving path of service personnel, allocation of repair resources, and vehicle availability coefficient. Take the importance of regional load, the ability of power supply service personnel, and the completeness rate of materials as input parameters for the design of emergency repair plans. Then design an evaluation function for the emergency repair plan, with the upper limit of the repair time as the constraint of the plan and solve for the optimal emergency repair plan. This method searches for multiple possible combination schemes among the resources required for existing equipment maintenance, and evaluates the feasibility of the schemes through evaluation models to optimize the existing equipment maintenance schemes and improve the efficiency of equipment maintenance.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Junfeng Qiao, Aihua Zhou, Lin Peng, Yun Chen, Zhonghao Qian, Min Xu, Sen Pan, and Pei Yang "Optimization method for equipment maintenance plan for power supply service command", Proc. SPIE 13445, International Conference on Electronics, Electrical and Information Engineering (ICEEIE 2024), 134452S (11 December 2024); https://doi.org/10.1117/12.3052783

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available