Paper
1 June 1991 Use of dome (meniscus) lenses to eliminate birefringence and tensile stresses in spatial filters for the Nova laser
John H. Pitts, Demos T. Kyrazis, Lynn G. Seppala, Stanley E. Bumpas
Author Affiliations +
Abstract
We document the concept and the design method for dome lenses that have a compressive pressure applied to the periphery. Dome (meniscus) lenses can eliminate both birefringence and tensile stresses if used in evacuated spatial filters where a pressure difference is present across the lenses. Calculations show that spatial filter birefringence is an insignificant 3 nm within the portion of a 740-mm Nova spatial filter dome lens illuminated by the laser beam. Membrane stresses are everywhere compressive, varying from -1.2 to -2.4 MPa, and are nearly uniform over the illuminated portion of the lens. Eliminating sources of birefringence on the Nova laser could increase the energy on target with Type 11/Type II frequency conversion from '-50% to the '70% level attainable with Type I/Type II frequency conversion. Eliminating tensile stresses may reduce the damage and catastrophic failure that has occurred in some Nova spatial filter input lenses. The major disadvantage of using dome lenses on Nova is the cost of new lenses which could range up to $50,000 per lens for the material and $20,000 per lens for finishing.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John H. Pitts, Demos T. Kyrazis, Lynn G. Seppala, and Stanley E. Bumpas "Use of dome (meniscus) lenses to eliminate birefringence and tensile stresses in spatial filters for the Nova laser", Proc. SPIE 1441, Laser-Induced Damage in Optical Materials: 1990, (1 June 1991); https://doi.org/10.1117/12.27538
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lenses

Spatial filters

Birefringence

Laser induced damage

Frequency conversion

Bladder

Silica

Back to Top