Paper
1 September 1991 Experimental studies of an XeCl laser with UV preionization perpendicular and parallel to the electrode surfaces
Author Affiliations +
Proceedings Volume 1503, Excimer Lasers and Applications III; (1991) https://doi.org/10.1117/12.46921
Event: ECO4 (The Hague '91), 1991, The Hague, Netherlands
Abstract
This paper reports the behavior of an XeCl laser having two independent preionizers which generate UV radiation into the discharge region in the perpendicular and parallel direction to the electrode surfaces. Output energy and other parameters have been measured using a single preionizer and both preionizers, changing the power supply polarity and varying the delay time between the preionization and the main discharge. When the preionization system generated photons only in the direction perpendicular to the electrode surfaces and a negative power supply was used, a high discharge current and a high-output laser energy were obtained. Besides, diffusion coefficient of the photo-preionized electrons played an important role in the laser behavior, particularly when a consistent delay time between the onset time of the preionization and the main discharge was present.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vincenzo Nassisi "Experimental studies of an XeCl laser with UV preionization perpendicular and parallel to the electrode surfaces", Proc. SPIE 1503, Excimer Lasers and Applications III, (1 September 1991); https://doi.org/10.1117/12.46921
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Electrons

Excimer lasers

Diffusion

Ultraviolet radiation

Power supplies

Gas lasers

RELATED CONTENT


Back to Top