Paper
5 March 1993 Bragg fiber laser sensor
A. Tino Alavie, Andreas Othonos, Serge Melle, Kexing Liu, Raymond M. Measures
Author Affiliations +
Proceedings Volume 1795, Fiber Optic and Laser Sensors X; (1993) https://doi.org/10.1117/12.141244
Event: Fibers '92, 1992, Boston, MA, United States
Abstract
A tunable erbium fiber laser which utilizes a broadband mirror and an intracore Bragg grating reflector in a side-pump configuration is designed and developed. This arrangement is used as a laser sensor which greatly enhances the performance of a recently developed wavelength demodulation system by University of Toronto Institute for Aerospace Studies. Sensor design parameters for optimal performance in terms of the fiber laser geometry, doped fiber length, and the required pump energies are presented. Laser tuning with temperature has been achieved and shows much improvement in the SNR with respect to the previous techniques, i.e., interrogation of the Bragg grating sensor with a broadband source.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Tino Alavie, Andreas Othonos, Serge Melle, Kexing Liu, and Raymond M. Measures "Bragg fiber laser sensor", Proc. SPIE 1795, Fiber Optic and Laser Sensors X, (5 March 1993); https://doi.org/10.1117/12.141244
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Sensors

Fiber Bragg gratings

Fiber optics sensors

Laser optics

Reflectivity

Fiber optics

RELATED CONTENT

Fiber Optic Bragg Grating Sensors
Proceedings of SPIE (February 13 1990)
Fiber Optic Sensors Utilizing Surface Reflections
Proceedings of SPIE (September 17 1984)
Structural bending sensor using fiber gratings
Proceedings of SPIE (November 01 1994)

Back to Top