Paper
1 July 1993 Vascular anastomosis using a 1.9-μm laser
Robert B. Stewart, D. T. Zelt, Glenn M. LaMuraglia M.D., Robert T.V. Kung
Author Affiliations +
Proceedings Volume 1876, Lasers in Otolaryngology, Dermatology, and Tissue Welding; (1993) https://doi.org/10.1117/12.147031
Event: OE/LASE'93: Optics, Electro-Optics, and Laser Applications in Scienceand Engineering, 1993, Los Angeles, CA, United States
Abstract
A 1.9 micrometers laser is used to weld small diameter vessels. The absorption characteristic of tissues at this wavelength renders this laser suitable for welding of vessels with diameters in the 1 to 3 mm range. The appropriate laser power range for welding is 120 to 200 mW with a fluence on target of approximately 100 J/cm2. For vessel wall thicknesses matching the optical absorption depth, measured burst pressure was approximately 400 mmHg. In this case the acute weld strength is greater than 3 X 106 dynes/cm2. Anastomotic compliance of the welded zone was a factor of two lower than native vessel tissue both immediately following welding and after 10 weeks of healing. The advantages offered by this laser wavelength are convenient energy delivery via fiber optics, no irrigation needed for tissue cooling, and applicability to small vessel anastomoses.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert B. Stewart, D. T. Zelt, Glenn M. LaMuraglia M.D., and Robert T.V. Kung "Vascular anastomosis using a 1.9-μm laser", Proc. SPIE 1876, Lasers in Otolaryngology, Dermatology, and Tissue Welding, (1 July 1993); https://doi.org/10.1117/12.147031
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tissues

Absorption

Arteries

Carbon dioxide lasers

In vivo imaging

Argon ion lasers

Laser welding

Back to Top