Paper
8 September 1993 Damage detection and mitigation of composite structures using smart materials
Abu S. Islam, Kevin C. Craig
Author Affiliations +
Abstract
This paper reports the results of an ongoing experimental program for damage assessment and mitigation of composite structures using smart materials. One consequence of all damage to a composite structure is a change in its stiffness. This change in stiffness is measured by modal analysis which can be carried out using piezoelectric films as both sensor and actuator on the structure member. It is shown that the presence of damage can be detected by the change in natural frequencies and the location of the damage can be detected from the ratio of changes in frequencies between two successive modes.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Abu S. Islam and Kevin C. Craig "Damage detection and mitigation of composite structures using smart materials", Proc. SPIE 1917, Smart Structures and Materials 1993: Smart Structures and Intelligent Systems, (8 September 1993); https://doi.org/10.1117/12.152830
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Actuators

Intelligence systems

Modal analysis

Sensors

Smart materials

Damage detection

Back to Top