Cooled deformable mirror for the ALPHA-LAMP integration experiment

Robert L. Lillard; H. A. Heynau

doi:10.1117/12.152656

25 August 1993 Cooled deformable mirror for the ALPHA-LAMP integration experiment

Robert L. Lillard, H. A. Heynau

Proceedings Volume 1920, Active and Adaptive Optical Components and Systems II; (1993) https://doi.org/10.1117/12.152656
Event: 1993 North American Conference on Smart Structures and Materials, 1993, Albuquerque, NM, United States

Abstract

A large aperture, liquid cooled Deformable Mirror (DM) is being developed in support of the ALPHA-LAMP Integration (ALI) experiment requirements. This development will result in a continuous facesheet DM having an active aperture of greater than 28 cm, which is believed to be the largest diameter operational unit developed to date. The mirror is actuated in the active and surrounding guard ring regions by 241 low voltage piezoelectric actuators with a full stroke capability of 10 micrometers for interactuator strokes of up to 2.5 micrometers . The coupling between an individual actuator and the nearest neighbor actuators is projected to be approximately 12%. Performance tests on a smaller scale, simulator unit indicate that all requirements for a high optical power DM subsystem will be met. The design, fabrication, and simulator signal testing phases have been completed and the intermediate results will be reported. The mirror and drive electronics integration and testing are scheduled for completion later in 1993. Performance characteristics of the simulator and portions of the final mirror and drive electronics will be presented, including transfer function, gain and phase data, measured influence function, phase map comparisons with modeling predictions, a 2-dimensional analytical form for the influence function, and surface figure characteristics of the completed mirror.

Citation Download Citation

Robert L. Lillard and H. A. Heynau "Cooled deformable mirror for the ALPHA-LAMP integration experiment", Proc. SPIE 1920, Active and Adaptive Optical Components and Systems II, (25 August 1993); https://doi.org/10.1117/12.152656

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available