Paper
16 August 1994 Advanced laser driver for soft x-ray projection lithography
Luis E. Zapata, Raymond J. Beach, C. Brent Dane, Patrick Reichert, John N. Honig, Lloyd A. Hackel
Author Affiliations +
Proceedings Volume 2206, High-Power Gas and Solid State Lasers; (1994) https://doi.org/10.1117/12.184615
Event: Europto High Power Lasers and Laser Applications V, 1994, Vienna, Austria
Abstract
A diode-pumped Nd:YAG laser for use as a driver for a soft x-ray projection lithography system is described. The laser will output 0.5 to 1 J per pulse with about 5 ns pulse width at up to 1.5 kHz repetition frequency. The design employs microchannel-cooled diode laser arrays for optical pumping, zigzag slab energy storage, and a single frequency oscillator injected regenerative amplifier cavity using phase conjugator beam correction for near diffraction limited beam quality. The design and initial results of this laser's activation experiments are presented.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Luis E. Zapata, Raymond J. Beach, C. Brent Dane, Patrick Reichert, John N. Honig, and Lloyd A. Hackel "Advanced laser driver for soft x-ray projection lithography", Proc. SPIE 2206, High-Power Gas and Solid State Lasers, (16 August 1994); https://doi.org/10.1117/12.184615
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diodes

Optical amplifiers

Oscillators

X-rays

Projection lithography

X-ray lithography

Nd:YAG lasers

Back to Top