Paper
7 September 1994 Monitoring of high-power laser beam profiles
Michael A. O'Key, Michael R. Osborne, Paul A. Hilton
Author Affiliations +
Proceedings Volume 2207, Laser Materials Processing: Industrial and Microelectronics Applications; (1994) https://doi.org/10.1117/12.184717
Event: Europto High Power Lasers and Laser Applications V, 1994, Vienna, Austria
Abstract
Results are presented of an experimental investigation into various beam sampling and monitoring techniques applicable to high power laser systems. A hole matrix mirror displayed good sampling fidelity, and power handling capabilities in excess of 10 kW have been demonstrated. A holographic beam sampler displayed poor spatial fidelity in the sampled beams. The transmission leakage through a dielectric high reflector was shown to be an unreliable method of beam sampling due to non-uniform transmission characteristics. Phase profiles of beams with various aberrations have been recorded using a self referencing Mach Zehnder and a point diffraction interferometer. The results show a good correspondence with interferograms of the same aberrations obtained conventionally. The applicability of these devices to particular laser types in industrial environments is discussed.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael A. O'Key, Michael R. Osborne, and Paul A. Hilton "Monitoring of high-power laser beam profiles", Proc. SPIE 2207, Laser Materials Processing: Industrial and Microelectronics Applications, (7 September 1994); https://doi.org/10.1117/12.184717
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Dielectrics

Coating

Interferometers

Fringe analysis

High power lasers

Reflectors

RELATED CONTENT

375 W 37.5 µJ less than 170 fs laser system...
Proceedings of SPIE (February 17 2017)
Interferometric devices for angular measurements
Proceedings of SPIE (August 19 1996)
Facet engineering of high power single emitters
Proceedings of SPIE (February 21 2011)
Survey Of Properties Of Volume Holographic Materials
Proceedings of SPIE (May 25 1989)
Striped Fabry-Perots: improved efficiency for velocimetry
Proceedings of SPIE (January 01 1991)

Back to Top