Paper
19 January 1995 Stretching and bending with flexible FTIR process monitors, probes, and software
David C. Peters
Author Affiliations +
Proceedings Volume 2367, Optical Sensors for Environmental and Chemical Process Monitoring; (1995) https://doi.org/10.1117/12.199662
Event: Optical Sensing for Environmental and Process Monitoring, 1994, McLean, VA, United States
Abstract
The use of FT-IR spectroscopy, either in the mid-IR region or near-IR region, offers fundamental advantages over other technologies. Spectral region selection criteria are reviewed, to help define when to use the mid-IR region or the near-IR region (or even when to use parts of both New fiber optic sampling probes for transmission, attenuated total reflection, diffuse reflection and web sensing have solved nagging problems. What many process analyzer specialists are discovering is that new probes are becoming available each month, offering newer process tolerance (can tolerate higher temp or pressure) or even new sampling approaches altogether. This paper describes on-line applications in pharmaceuticals, specialty chemicals, polymer production and refinery production which demonstrate the range of techniques used to appropriately optimize the on- line analyzer. In addition, calibration transfer issues are discussed, demonstrating the importance of the software tools to help sort out the causes for cal errors (spectral contamination, etc.).
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David C. Peters "Stretching and bending with flexible FTIR process monitors, probes, and software", Proc. SPIE 2367, Optical Sensors for Environmental and Chemical Process Monitoring, (19 January 1995); https://doi.org/10.1117/12.199662
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Mid-IR

Data modeling

Chemical analysis

FT-IR spectroscopy

Near infrared

Polymers

Back to Top