Paper
22 February 1995 Fiber optic delay-line matched filters using metal film reflectors for optical packet address detection
Author Affiliations +
Proceedings Volume 2449, Fiber Optic Network Components; (1995) https://doi.org/10.1117/12.201967
Event: Advanced Networks and Services, 1995, Amsterdam, Netherlands
Abstract
Reflectively tapped fiber-optic delay-line matched filters with metal film reflectors evaporated on cleaved fiber ends have been fabricated. This novel device can provide ultra-high speed signal processing capability, small size, and low loss, and be used as an optical packet address detector for all-optical wavelength division multiplexing switching networks. Using the filters, detection of 2.5 Gb/s, 6-bit packet addresses for optical ring networks has been successfully demonstrated. Experimental and calculation results on correlation outputs of the filters are reported.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jong-Dug Shin, MinYong Jeon, Cheoul-Shin Kang, and El-Hang Lee "Fiber optic delay-line matched filters using metal film reflectors for optical packet address detection", Proc. SPIE 2449, Fiber Optic Network Components, (22 February 1995); https://doi.org/10.1117/12.201967
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Fiber optics

Reflectivity

Filtering (signal processing)

Optical filters

Reflectors

Fiber couplers

Back to Top