Paper
3 July 1995 Ultrahigh-precision metrology on masks for 0.25 μm device generation
Author Affiliations +
Abstract
Metrology becomes more and more a key function in mask making and development of new technologies. Due to the Sematech strategy a precision performance of less than 9 nm (3(sigma) ) will be mandatory for the pattern placement and CD metrology tools for masks of the 0.25 micrometers device generation. Performance data below 9 nm demonstrate the capability of today's metrology systems for this application. On phase shift masks (PSM) the pattern placement metrology tool should be able to measure the positions of the structures of both layers, the phase shifter and the chromium. Measurement data obtained with the LMS 2020 on embedded attenuated PSMs as well as results on Levenson type PSMs demonstrate the excellent applicability of optical metrology systems in this field. Cost of ownership (COO) of the metrology tool is another important issue to be reviewed. Currently more and more purchasing decisions among competing tools of similar performance are based on the COO comparison.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Klaus-Dieter Roth and Carola Blaesing-Bangert "Ultrahigh-precision metrology on masks for 0.25 μm device generation", Proc. SPIE 2512, Photomask and X-Ray Mask Technology II, (3 July 1995); https://doi.org/10.1117/12.212762
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metrology

Photomasks

Reticles

Time metrology

Phase shifts

Semiconducting wafers

Critical dimension metrology

Back to Top