Paper
30 September 1996 New development of laser cladding system on larger area for industrial application
Xichen Yang, Xin Zhao, Bao-Qi Wang
Author Affiliations +
Abstract
In this work, a new laser cladding system on larger area for industrial application has been developed. It consists of wide-band scanning mirror and automatic powder feeder by the rotating feed wheel with bucket-type scoops. It is shown that all kinds of laser cladding powders including not only Ni-base, Fe-base, Co-base, but also superfine and light ceramics powders ZrO2 Al2O3 as well as superfine and heavy WC, TiC with spherical and edged grains can be fed. The powder feed rate can be continuously varied from 0.5 to 200g/min, and the measured tolerance limits are less than 2 percent in all conditions. The powder feeder can deliver powders by both side-band of 10-35mm and focusing band. Without the carrier gas the powder flow depends mainly on gravity. The powder stream at the nozzle is uniform, and the powder utilization factor is over 98 percent. Some applications in metallurgical industry have been successfully made.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xichen Yang, Xin Zhao, and Bao-Qi Wang "New development of laser cladding system on larger area for industrial application", Proc. SPIE 2888, Laser Processing of Materials and Industrial Applications, (30 September 1996); https://doi.org/10.1117/12.253129
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Carbon dioxide lasers

Laser development

Laser processing

Laser systems engineering

Mirrors

Calibration

RELATED CONTENT


Back to Top