Paper
20 March 1997 Measurement and prediction of weld pool shape during gas metal arc welding using a noncontact laser profiling system
M. A. Wahab, M. J. Painter
Author Affiliations +
Proceedings Volume 2921, International Conference on Experimental Mechanics: Advances and Applications; (1997) https://doi.org/10.1117/12.269816
Event: International Conference on Experimental Mechanics: Advances and Applications, 1996, Singapore, Singapore
Abstract
The main objective of this work is to provide detailed measurement of the full 3-dimensional weld pool shape for the Gas Metal Arc Welding (GMAW) process. Relationships between the welding process variables and important pool shape parameters have been established, and the measured profile is in an appropriate form for use in numerical models of the GMA welding process. A mechanical ejection device instantaneously emptied the molten metal from weld pool by rapidly accelerating and decelerating the test plate being welded. A non-contact laser profiling system is used for accurate measurement of the exposed weld pools. Welding speed and welding current are found to have the greatest influence on the length of a weld pool, and increasing heat input level yields higher values for all critical weld pool dimensions.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. A. Wahab and M. J. Painter "Measurement and prediction of weld pool shape during gas metal arc welding using a noncontact laser profiling system", Proc. SPIE 2921, International Conference on Experimental Mechanics: Advances and Applications, (20 March 1997); https://doi.org/10.1117/12.269816
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Profiling

Laser systems engineering

Laser welding

Computer simulations

Electrodes

Distortion

RELATED CONTENT


Back to Top