Concerns about seam-welded piping at elevated temperatures

Jude R. Foulds; R. Viswanathan; Richard M. Tilley

doi:10.1117/12.259182

14 November 1996 Concerns about seam-welded piping at elevated temperatures

Jude R. Foulds, R. Viswanathan, Richard M. Tilley

Proceedings Volume 2947, Nondestructive Evaluation of Utilities and Pipelines; (1996) https://doi.org/10.1117/12.259182
Event: Nondestructive Evaluation Techniques for Aging Infrastructure and Manufacturing, 1996, Scottsdale, AZ, United States

Abstract

Following the catastrophic failures of seam-welded reheat piping at two power stations in 1985/86, the industry, with the assistance of the Electric Power Research Institute (EPRI) embarked on an aggressive inspection and evaluation effort to minimize the apparent risk associated with operating seam-welded hot reheat piping. This effort resulted in the EPRI guidelines for the evaluation of seam- welded stream pipes issued in 1987. Since 1987, more data and plant experience relating to seam weld cracking have become available. The data and experience have furthered our understanding of the inservice damaging process, and have helped assess the field effectiveness of the EPRI- recommended procedure for inservice seam-welded pipe inspection. Based on metallurgical evaluation and mechanical tests of weldments, the factors contributing to failures have been identified to be some or all of the following: excess stress and temperature; pre-existing flaws; nonmetallic inclusions; sharp weld cusps and creep strength mismatch; impurity segregation; weld roof-angle; etc. Since exceptions exist in every case, attempts to develop screening criteria for pipes 'at risk' have been less than successful. This paper presents an overview of the current state-of-knowledge with regard to the integrity of hot reheat seam-welded piping in the USA, with summary guidance on quantitative application of this knowledge of the life prediction of inservice piping.

Citation Download Citation

Jude R. Foulds, R. Viswanathan, and Richard M. Tilley "Concerns about seam-welded piping at elevated temperatures", Proc. SPIE 2947, Nondestructive Evaluation of Utilities and Pipelines, (14 November 1996); https://doi.org/10.1117/12.259182

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available