Paper
25 April 1997 Correction method for shift-variant characteristics of the SPECT measurement system
Masahiro Mimura, Takashi Obi, Masahiro Yamaguchi, Nagaaki Ohyama
Author Affiliations +
Abstract
SPECT imaging system has shift-variant characteristics due to nonuniform attenuation of gamma-ray, collimator design, scattered photons, etc. In order to provide quantitatively accurate SPECT images, these shift-variant characteristics should be compensated in reconstruction. This paper presents a method to correct the shift-variant characteristics based on a continuous-discrete mapping model. In the proposed method, the projection data are modified using sensitivity functions so that filtered backprojection (FBP) method can be applied. Since the projection data are assumed to be acquired by narrow ray sum beams in the FBP method, narrow ray sum beams are approximated by a weighted sum of sensitivity functions of the measurement system, then the actual projection data are corrected by the weighting factors. Finally, FBP method is applied to the corrected projection data and a SPECT image is reconstructed. Since the proposed method requires the inversion of smaller matrices than the conventional algebraic methods, the amounts of calculation and memory space become smaller, and the stability of the calculation is greatly improved as well. The results of the numerical simulations are also demonstrated.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masahiro Mimura, Takashi Obi, Masahiro Yamaguchi, and Nagaaki Ohyama "Correction method for shift-variant characteristics of the SPECT measurement system", Proc. SPIE 3034, Medical Imaging 1997: Image Processing, (25 April 1997); https://doi.org/10.1117/12.274094
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Single photon emission computed tomography

Photons

Sensors

Signal attenuation

Collimators

Data acquisition

Data conversion

Back to Top