Paper
15 August 1998 Sensing and control system of process quality in CO2 laser deep-penetration welding
Wuzhu Chen, Xudong Zhang, Jiangcheng Bao, Yong Wang, Tianya Li, Ping Jiang, Hongjun Zhang
Author Affiliations +
Abstract
A sensing and control system of process quality in CO2 laser deep penetration welding has been developed, including plasma photo sensor (PS) and plasma charge sensor (PCS), signal processing circuit, personal computer, and optimization and control software. By using the information of plasma radiation and plasma charge, the focusing lens is adjusted to the optimum focal point position (at which the maximum penetration can be achieved) and closed-loop control is realized to assure the focal point position and penetration depth constant. In laser welding of the workpiece aslant placed with larger angle, the variation of focal point position is less than 0.2 mm and the fluctuation of penetration depth is less than 0.05 mm. The control system has been preliminarily applied in laser precision welding of 2.5 m long zircaloy fuel channel used in nuclear heat-supply reactor.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wuzhu Chen, Xudong Zhang, Jiangcheng Bao, Yong Wang, Tianya Li, Ping Jiang, and Hongjun Zhang "Sensing and control system of process quality in CO2 laser deep-penetration welding", Proc. SPIE 3550, Laser Processing of Materials and Industrial Applications II, (15 August 1998); https://doi.org/10.1117/12.317899
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser welding

Signal processing

Plasma

Picosecond phenomena

Control systems

Signal detection

Process control

RELATED CONTENT

Closed loop control for laser beam welding
Proceedings of SPIE (April 26 2007)
Process Control During Laser Machining
Proceedings of SPIE (March 24 1989)
Control of transient processes during CO2-laser beam welding
Proceedings of SPIE (September 07 1994)
Photonics In Materials Processing With Laser Radiation
Proceedings of SPIE (October 26 1989)

Back to Top