Paper
7 April 1999 High-performance InSb/In1-xAlxSb focal plane detector arrays grown by MBE
Andrew D. Johnson
Author Affiliations +
Abstract
Results are presented for indium antimonide/indium aluminum antimonide (InSb/InAlSb) diodes grown by molecular beam epitaxy (MBE) for infrared detector applications. By lowering the substrate growth temperature during epitaxy it is possible to increase the dopant activation, both n and p-type. In addition, the Shockley-Read trap density is reduced by a factor X5 to approximately 2 X 1013 cm-3 and the defect density in the MBE grown material falls to approximately 25 cm-2. The application of these diodes with improved performance to 2D infrared detector arrays with enhanced detectivities operating at higher temperatures will be described. Conventional 2D arrays that operate at 80 K have also been fabricated. Typical noise equivalent temperature difference (NETD) is less than 10 mK for a 1.5 msec stare time.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew D. Johnson "High-performance InSb/In1-xAlxSb focal plane detector arrays grown by MBE", Proc. SPIE 3629, Photodetectors: Materials and Devices IV, (7 April 1999); https://doi.org/10.1117/12.344565
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Doping

Detector arrays

Diodes

Sensors

Semiconducting wafers

Indium

Tellurium

RELATED CONTENT


Back to Top