Paper
25 June 1999 Thermomechanical distortions of advanced optical reticles during exposure
Jaehyuk Chang, Amr Y. Abdo, Byung-Kyu Kim, Theodore M. Bloomstein, Roxann L. Engelstad, Edward G. Lovell, William A. Beckman, John W. Mitchell
Author Affiliations +
Abstract
If optical lithography is to be extended into the 157 nm regime, controlling mask-related distortions will be a necessity. Thermomechanical distortions during exposure could be a major source of pattern placement error, especially if alternative materials such as CaF2 or MgF2 are employed. Full 3D finite element heat transfer and structural models have been developed to simulate the response of the reticle during both full-field and scanning exposure systems. Transient and periodic steady-state temperature distributions have been determined for typical exposure duty cycles. Corresponding in-plane and out-of- plane thermal distortions have been identified for both fused silica and calcium fluoride substrates. Under equivalent exposure conditions, the distortions in the CaF2 are significantly higher.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jaehyuk Chang, Amr Y. Abdo, Byung-Kyu Kim, Theodore M. Bloomstein, Roxann L. Engelstad, Edward G. Lovell, William A. Beckman, and John W. Mitchell "Thermomechanical distortions of advanced optical reticles during exposure", Proc. SPIE 3676, Emerging Lithographic Technologies III, (25 June 1999); https://doi.org/10.1117/12.351144
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reticles

Silica

Heat flux

Convection

Performance modeling

Thermal modeling

Photomasks

Back to Top