Paper
25 April 2000 Design and fabrication of a trichroic prism for liquid crystal projection system
Fang-Chuan Ho, Cheng-Wei Chu
Author Affiliations +
Proceedings Volume 3954, Projection Displays 2000: Sixth in a Series; (2000) https://doi.org/10.1117/12.383384
Event: Electronic Imaging, 2000, San Jose, CA, United States
Abstract
A thin film color selective beam splitter is designed and the method of fabrication is described through a single deposition process of a coating system onto the two lateral faces of a triangular prism with base angles of 60 deg. and 45 deg. respectively. Properly prepared contact prisms are then cemented onto the two coated surfaces to make all the incoming and outgoing light beams normal to the prism block. The tri-chromatic prism provides the primary colors R, G, B according to the sequence that the red color is first reflected when the modulated white beam is incident at 30 deg. onto the dichroic filter deposited on the lateral face with the base of 60 deg., and then the rest part of the spectrum is incident at the other dichroic filter of the system at 45 deg. to get the blue and green beams separated. Color performances of the system from the thin film filters constructed with TiO2 and Al2O3 as the high and low index layers respectively are analyzed. The advantages to use the tri-color prism block in a projection device with reflective liquid crystal light valves are discussed.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fang-Chuan Ho and Cheng-Wei Chu "Design and fabrication of a trichroic prism for liquid crystal projection system", Proc. SPIE 3954, Projection Displays 2000: Sixth in a Series, (25 April 2000); https://doi.org/10.1117/12.383384
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

Optical filters

Thin films

Liquid crystals

Light valves

Reflectivity

Projection systems

RELATED CONTENT

Thin film beamsplitters
Proceedings of SPIE (October 26 1994)
Studies on superprism effects in multilayer thin film stacks
Proceedings of SPIE (October 04 2005)
Fabrication of high-quality cavity mirror
Proceedings of SPIE (October 06 2000)
Projection optics for reflective light valves
Proceedings of SPIE (May 20 1999)

Back to Top