Paper
10 April 2000 Si-based microphone testing methodology and noise reduction
C. S. Premachandran, Zhe Wang, Tai Chong Chai, S. C. Chong, Mahadevan K. Iyer
Author Affiliations +
Proceedings Volume 4019, Design, Test, Integration, and Packaging of MEMS/MOEMS; (2000) https://doi.org/10.1117/12.382304
Event: Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS, 2000, Paris, France
Abstract
In this paper two different packaging and testing approaches were studied for Si based microphone. Microphone performance was tested with Ceramic, Plastic and metal packages. Sensitivity testing of microphone is done when it is connected to an ASIC die. Testing was done with microphone and ASIC packaged separately and also in a single package. Substantial noise was generated when microphone and ASIC are tested separately in a PCB. Noise was detected after 150 Hz with the noise intensity reducing as it goes to higher frequencies. This was observed regardless of the packaging schemes. Different shielding methods were tried and found that copper foil shielding results in substantial noise reduction during frequency response testing and a flat response curve was observed with metal can package. Form this new testing methodology, it is demonstrated that same ASIC can be used repeatedly during microphone testing and hence some cost reduction can be expected.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. S. Premachandran, Zhe Wang, Tai Chong Chai, S. C. Chong, and Mahadevan K. Iyer "Si-based microphone testing methodology and noise reduction", Proc. SPIE 4019, Design, Test, Integration, and Packaging of MEMS/MOEMS, (10 April 2000); https://doi.org/10.1117/12.382304
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

Packaging

Silicon

Denoising

Ceramics

Metals

Epoxies

RELATED CONTENT


Back to Top