Paper
5 January 2001 X-ray deflector: theory, design, and applications
Author Affiliations +
Abstract
Multilayer depth-graded structures make possible creating the x-ray mirrors with the reflection angular width of about 0.2 degrees - 0.5 degrees at the wavelength of 1.54 angstrom. Special numerical optimization techniques, such as needle variations, Powell method, and some other were used to calculate the multilayer structures with desired reflection curves. It was found that for CuK radiation and the angular interval 0.5 - 0.9 degrees W-C an W-B4C structures can have the mean reflectivity about 30% with the relative deviation from uniformity better than 0.7%. Such multilayer mirrors were successfully manufactured on quartz substrates with roughness level of about 6 angstrom using magnetron sputtering technology. On this basis the first computer-driven x-ray deflector was designed and tested. For the mirror angular interval of 0.4 degree the output beam deflection interval is equal to 0.8 degree, that is enough for a variety of applications. The laboratory experiments with the deflector included the x-ray raster imaging with the resolution of about 20 micrometers, and automatic beam adjustment and re-aiming. Another possible applications are the x-ray microscopy, compensation for orbital motion of space x-ray telescopes, space x-ray communication.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir V. Protopopov "X-ray deflector: theory, design, and applications", Proc. SPIE 4145, Advances in X-Ray Optics, (5 January 2001); https://doi.org/10.1117/12.411646
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Mirrors

Reflectivity

Signal detection

Sensors

Space telescopes

Manufacturing

RELATED CONTENT

Optics for the imaging x-ray polarimetry explorer
Proceedings of SPIE (October 03 2017)
Calibration of the XRT SOLARB flat mirror samples at the...
Proceedings of SPIE (October 11 2004)
X-ray telescopes for the ESA XMM spacecraft
Proceedings of SPIE (November 19 1998)
Performance of the InFOCμS pixellated CdZnTe detector
Proceedings of SPIE (August 18 2005)

Back to Top