Ultrasonic resonance spectroscopy of composite rings for flywheel rotors

Laura M. Harmon; George Y. Baaklini

doi:10.1117/12.435568

3 August 2001 Ultrasonic resonance spectroscopy of composite rings for flywheel rotors

Laura M. Harmon, George Y. Baaklini

Proceedings Volume 4336, Nondestructive Evaluation of Materials and Composites V; (2001) https://doi.org/10.1117/12.435568
Event: 6th Annual International Symposium on NDE for Health Monitoring and Diagnostics, 2001, Newport Beach, CA, United States

Abstract

Flywheel energy storage devices comprised of multilayered composite rotor systems are being studied extensively for utilization in the international space station. These composite material systems were investigated with a recently developed ultrasonic resonance spectroscopy technique. The system, UltraSpec^TM, employs a swept frequency approach and performs a fast Fourier transform (FFT) on the frequency spectrum of the response signal. In addition, the system allows for equalization of the frequency spectrum, providing all frequencies with equal amounts of energy to excite higher order resonant harmonics. Interpretation of the second FFT, along with equalization of the frequency spectrum, offers greater assurance in acquiring and analyzing the fundamental frequency, or spectrum resonance spacing. The range of frequencies swept in a pitch-catch mode was varied up to 8 MHz depending on the material and geometry of the component. Single and multilayered material samples, with and without known defects, were evaluated to determine how the constituents of a composite material system affect the resonant frequency. Amplitude and frequency changes in the spectrum and spectrum resonance spacing domains were examined from ultrasonic response of a flat composite coupon, thin composite rings, and thick composite rings. Also, the ultrasonic spectroscopy responses from areas with an intentional delamination and a foreign material insert, similar to defects that may occur during manufacturing malfunctions, were compared to those from defect free areas in thin composite rings.A thick composite ring with varying thickness was tested to investigate the full thickness resonant frequency and any possible bulk interfacial bond issues. Finally, the effect on the frequency response of naturally occuring single and clustered voids in a composote ring was established.

Citation Download Citation

Laura M. Harmon and George Y. Baaklini "Ultrasonic resonance spectroscopy of composite rings for flywheel rotors", Proc. SPIE 4336, Nondestructive Evaluation of Materials and Composites V, (3 August 2001); https://doi.org/10.1117/12.435568

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available