Paper
22 October 2001 Removal of adhesives and coatings on iron artifacts using pulsed TEA CO2 and Nd:YAG lasers
Yangsook Koh, Istvan Sarady
Author Affiliations +
Proceedings Volume 4402, Laser Techniques and Systems in Art Conservation; (2001) https://doi.org/10.1117/12.445674
Event: Lasers in Metrology and Art Conservation, 2001, Munich, Germany
Abstract
Selective and precise removal of surface coatings and contaminants can be achieved using lasers with a suitable wavelength. In this study pulsed TEA CO2- and Nd:YAG- lasers have been used to remove old adhesive and coatings from iron artifacts. This laser cleaning technique can enable extremely precise removal of old coating layers without damaging the underlying metal. Cleaning test on different samples using an Nd:YAG-laser with wavelengths of 1,064 nm, 532 nm and a TEA CO2-laser with 10,600 nm have been carried out. Trial sample were treated with different kinds of adhesive and coatings used in metal conservation and then cleaned using the three lasers. The results were compared with a conventional technique, micro blasting. Comparison of the laser cleaned surfaces was performed by optical microscopy and Raman-spectroscopy. The comparative study showed that the best results were achieved with the TEA CO2 laser, with the coatings being removed entirely without damage to the substrate. The original surface of the substrate was preserved and any re-deposited particles could be removed easily using a scalpel or brush after the laser radiation treatment.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yangsook Koh and Istvan Sarady "Removal of adhesives and coatings on iron artifacts using pulsed TEA CO2 and Nd:YAG lasers", Proc. SPIE 4402, Laser Techniques and Systems in Art Conservation, (22 October 2001); https://doi.org/10.1117/12.445674
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Adhesives

Metals

Carbon dioxide lasers

Nd:YAG lasers

Iron

Carbon dioxide

Laser applications

RELATED CONTENT

Application of CO2 laser for electronic components soldering
Proceedings of SPIE (October 14 2011)
Economic technology of laser cutting
Proceedings of SPIE (February 07 2000)
High Efficiency, Tail-Free Pulses From TEA-CO2 Lasers
Proceedings of SPIE (October 06 1986)
Laser curing of thermosetting powder coatings
Proceedings of SPIE (March 03 1995)

Back to Top