Paper
21 February 2003 Optimized unit telescopes for interferometric arrays
Author Affiliations +
Abstract
The resolution of a conventional telescope is determined by the spatial extent of the collecting surface, usually the primary mirror. Astronomical interferometers achieve increased fine detail by using unit telescopes spaced over large distances to increase the spatial extent. The required wavefront quality places very tight tolerances on the unit telescopes and they should be designed with the prime goal of meeting the wavefront specification. The unit telescope must be optimized for the role of a beam compressor rather than attempting to modify a conventional design. Two alternative designs that minimize the number of reflections in the telescope will be considered, a crucial feature in obtaining the lowest possible wavefront error and maximizing throughput. The first, a siderostat has fixed imaging optics and a large steerable flat mirror to enable sky tracking. The second, an "Alt-Alt" system consists of two intersecting altitude axes in a "gyroscopic type" structure. A small flat lies at the intersection of the altitude axes to direct the starlight at a constant height and direction out of the telescope. The benefits and limitations of each are shown along with the key design issues that determine the most appropriate unit telescope for implementation in an interferometric telescope.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick B. Conway, Ian P. Baker, Anthony G. Mansfield, David F. Buscher, Christopher A. Haniff, Donald M. A. Wilson, and John Rogers "Optimized unit telescopes for interferometric arrays", Proc. SPIE 4838, Interferometry for Optical Astronomy II, (21 February 2003); https://doi.org/10.1117/12.458888
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Space telescopes

Wavefronts

Interferometry

Tolerancing

Optical instrument design

Back to Top