Identification of defect source to control reticle defect density for CAR and dry etching in the photomask process

Sung-Yong Cho; Won-Suk Ahn; Won-Il Cho; Moon-Gyu Sung; Seong-Yong Moon; Seong-Woon Choi; Hee-Sun Yoon; Jung-Min Sohn

doi:10.1117/12.468096

27 December 2002 Identification of defect source to control reticle defect density for CAR and dry etching in the photomask process

Sung-Yong Cho, Won-Suk Ahn, Won-Il Cho, Moon-Gyu Sung, Seong-Yong Moon, Seong-Woon Choi, Hee-Sun Yoon, Jung-Min Sohn

Author Affiliations +

Proceedings Volume 4889, 22nd Annual BACUS Symposium on Photomask Technology; (2002) https://doi.org/10.1117/12.468096
Event: Photomask Technology 2002, 2002, Monterey, CA, United States

Abstract

As the design rule of lithography becomes smaller, printability of reticle defect to wafer is crucial for the photomask manufacturing technology. In order to improve the controllability of reticle defects, inspection and repair systems are expanding their capability by continuously modifying hardware and software. This is a good solution to detect and review the defect but it is indirect approaching to reduce the defect in the photomask process. To produce the photomask of defect free or low defect density, effort is needed to improve the capability of defect control in the mask-making process and to evaluate the source of hard defect as well as soft defect. In this paper, we concern the defect source and the feature of printed defects in photomask manufacturing steps. We also discuss the efforts to eliminate the defect source and to control the mask-making process with low defect density. In order to eliminate the source of defects, we partition the mask-making process with defect inspection system, SLF27 TeraStar and Lasertec MD2000, and review a defect shape with CD SEM and AFM. And we compare printed defects, which exist in each process steps, after dry etching process.

Citation Download Citation

Sung-Yong Cho, Won-Suk Ahn, Won-Il Cho, Moon-Gyu Sung, Seong-Yong Moon, Seong-Woon Choi, Hee-Sun Yoon, and Jung-Min Sohn "Identification of defect source to control reticle defect density for CAR and dry etching in the photomask process", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.468096

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available