Maximizing lumen output of LEDs for automotive exterior signal lighting applications

Lawrence G. Conn

doi:10.1117/12.476548

3 July 2003 Maximizing lumen output of LEDs for automotive exterior signal lighting applications

Lawrence G. Conn

Proceedings Volume 4996, Light-Emitting Diodes: Research, Manufacturing, and Applications VII; (2003) https://doi.org/10.1117/12.476548
Event: Integrated Optoelectronics Devices, 2003, San Jose, CA, United States

Abstract

Light emitting diodes (LEDs) operated at relatively low currents when first used for automotive exterior signal lighting. These devices were generally the 3 mm or 5 mm LEDs that were lighted with an input current of no more than 30 milliamperers per LED. Generally these LEDs were used in center high mounted stop lamps or side marker lamps. In most cases the center high mounted stop lamps required 30 to 70 of these low powered devices depending on LED type, location on the vehicle and customer requirements. Today LEDs are being used for not only the center high mounted stop lamp, but literally all exterior automotive signal lamps. These LEDs are exceedingly brighter than the 3 mm or the 5 mm devices were. These brighter devices require the use of fewer LEDs per lamp function, but at the expense of requiring higher drive currents thus generating more heat. It is this heat generation that creates an issue that must be addressed by the lamp designer. The heat being generated by the latest generation of LED devices must be removed to ensure that the device maintains it capabilities to efficiently generate light. To enable the LED to operate efficiently certain factors of the LED must remain unchanged as it is operated over the life of the lamp in an automotive application. Two factors that must experience little or no change are the lumen output of the LED and the emitted color. The heat issue must be analyzed and eliminated or controlled when utilizing the newest "high power," high current devices in an automotive exterior signal lamp. The scope of this paper will identify the parameters that must be controlled to minimize the heat generated by the chip such that the light output of these latest "high power" LEDs is maximized and maintained.

Citation Download Citation

Lawrence G. Conn "Maximizing lumen output of LEDs for automotive exterior signal lighting applications", Proc. SPIE 4996, Light-Emitting Diodes: Research, Manufacturing, and Applications VII, (3 July 2003); https://doi.org/10.1117/12.476548

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available