Oscillatory electrochemical reactions at corroding silicon surface

Vitali Parkhutik; Junji Sasano; Yukio Ogata; Eugenia Matveeva

doi:10.1117/12.496986

7 May 2003 Oscillatory electrochemical reactions at corroding silicon surface

Vitali Parkhutik, Junji Sasano, Yukio Ogata, Eugenia Matveeva

Proceedings Volume 5114, Noise in Complex Systems and Stochastic Dynamics; (2003) https://doi.org/10.1117/12.496986
Event: SPIE's First International Symposium on Fluctuations and Noise, 2003, Santa Fe, New Mexico, United States

Abstract

The paper analyses the nature of chaotic and well-ordered oscillations of the anodic potential and open circuit potential of silicon immersed in aqueous electrolytes. These oscillations are observed when experimental conditions are fine tuned in what corresponds to the current flowing through the system, composition of electrolyte, its viscosity, etc. It is assumed that the oscillations are due to the accumulation of mechanical stress in the thin (50-80 nm) oxide film formed at the surface of silicon as a result of electrochemical anodic reaction. The stress is released by local etching of the oxide and its lifting-on from the Si surface. The process repeats again and again yielding long-lasting oscillations of the anodic potential value (amplitude around 1-15 V, period 20-150 s) or of the open circuit potential (several hundreds milli-volts). Along with temporal ordering of the process (oscillations of potential) there occurs a spatial ordering in the system - the surface of corroding Si sample is covered with hexagonally ordered semi-spherical cells (diameter about 700 nm). The effect is well-fit by the general phenomenology of chaos-order transitions in che4mical systems (bifurcations), strange attractors are the intrinsic features of these oscillations) and its kinetics is very similar to that of the Belousov-Zabotinsky reaction. However, oscillatory processes on the corroding Si surface are caused by quite specific physical and chemical mechanisms, which are not well understood presently. We present the microscopic model for the oscillatory behavior which involves, generation of local mechanical stress at the Si/electrolyte interface, non-linear electrochemical etching of Si, localization of the electric field at the etched surface, etc.

Citation Download Citation

Vitali Parkhutik, Junji Sasano, Yukio Ogata, and Eugenia Matveeva "Oscillatory electrochemical reactions at corroding silicon surface", Proc. SPIE 5114, Noise in Complex Systems and Stochastic Dynamics, (7 May 2003); https://doi.org/10.1117/12.496986

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available