Semi-automatic calibration technique using six inertial frames of reference

Alan Lai; Daniel A. James; Jason P. Hayes; Erol C. Harvey

doi:10.1117/12.530199

30 March 2004 Semi-automatic calibration technique using six inertial frames of reference

Alan Lai, Daniel A. James, Jason P. Hayes, Erol C. Harvey

Proceedings Volume 5274, Microelectronics: Design, Technology, and Packaging; (2004) https://doi.org/10.1117/12.530199
Event: Microelectronics, MEMS, and Nanotechnology, 2003, Perth, Australia

Abstract

A triaxial accelerometer calibration technique that evades the problems of the conventional calibration method of aligning with gravity is proposed in this paper. It is based on the principle that the vector sum of acceleration from three sensing axes should be equal to the gravity vector. The method requires the accelerometer to be oriented and stationary in 6 different ways to solve for the 3 scale factors and 3 offsets. The Newton-Raphson method was employed to solve the non-linear equations in order to obtain the scale factors and offsets. The iterative process was fast, with an average of 5 iterations required to solve the system of equations. The accuracy of the derived scale factors and offsets were determined by using them to calculate the gravity vector magnitude using the triaxial accelerometer to measure gravity. The triaxial accelerometer was used to measure gravity 264 times to determine the accuracy of the 44 acceptable sets of scale factors and offsets derived from the calibrations (gravity was assumed to equal 9.8000 ms^-2 during the calibration). It was found that the best calibration calculated the gravity vector magnitude to 9.8156 ± 0.4294 ms^-2. This equates to a maximum of 4.5% error in terms of a constant acceleration measurement. Because of the principle behind this method, it has the disadvantage that noise/error in only one axis will cause an inaccurate determination of all the scale factors and offsets.

Citation Download Citation

Alan Lai, Daniel A. James, Jason P. Hayes, and Erol C. Harvey "Semi-automatic calibration technique using six inertial frames of reference", Proc. SPIE 5274, Microelectronics: Design, Technology, and Packaging, (30 March 2004); https://doi.org/10.1117/12.530199

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available