Paper
2 April 2004 Temperature monitoring of Nd:YAG laser cladding (CW and PP) by advanced pyrometry and CCD-camera-based diagnostic tool
Author Affiliations +
Proceedings Volume 5399, Laser-Assisted Micro- and Nanotechnologies 2003; (2004) https://doi.org/10.1117/12.552850
Event: Laser-Assisted Micro- and Nanotechnologies 2003, 2003, St. Petersburg, Russian Federation
Abstract
The set of original pyrometers and the special diagnostic CCD-camera were applied for monitoring of Nd:YAG laser cladding (Pulsed-Periodic and Continuous Wave) with coaxial powder injection and on-line measurement of cladded layer temperature. The experiments were carried out in course of elaboration of wear resistant coatings using various powder blends (WC-Co, CuSn, Mo, Stellite grade 12, etc.) applying variation of different process parameters: laser power, cladding velocity, powder feeding rate, etc. Surface temperature distribution to the cladding seam and the overall temperature mapping were registered. The CCD-camera based diagnostic tool was applied for: (1) monitoring of flux of hot particles and its instability; (2) measurement of particle-in-flight size and velocity; (3) monitoring of particle collision with the clad in the interaction zone.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Doubenskaia, Ph. Bertrand, and Igor Yu. Smurov "Temperature monitoring of Nd:YAG laser cladding (CW and PP) by advanced pyrometry and CCD-camera-based diagnostic tool", Proc. SPIE 5399, Laser-Assisted Micro- and Nanotechnologies 2003, (2 April 2004); https://doi.org/10.1117/12.552850
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Pyrometry

Temperature metrology

Particles

CCD cameras

Diagnostics

Pulsed laser operation

RELATED CONTENT

Cross-section modeling of pulsed Nd:YAG laser cladding
Proceedings of SPIE (November 04 1994)
Image processing applied to the laser cladding process
Proceedings of SPIE (September 23 1996)
Pyrometry applications in laser machining
Proceedings of SPIE (January 30 2001)
Optical sensing in laser machining
Proceedings of SPIE (May 18 2009)

Back to Top