Paper
10 September 2004 A model for inert strength reduction in carbon-coated optical fibers
Author Affiliations +
Abstract
The inert strength of carbon-coated optical fibers (hermetic fibers) has been observed to be less than that of standard polymer coated optical fibers. A scaled version of the of the carbon-coated optical fiber was developed in the laboratory and used in an experimental investigation of the mechanical properties of this system. The microstructure and phase similarity between the scaled system and the optical fiber was established using Raman spectroscopy. The mechanical properties, residual stress in the film and the fracture toughness of the scaled system were determined using nano-indentation. A fracture mechanics model was developed to explain the mechanism of this strength reduction. The model, based on the cracking of thin films in residual tension, will be used to predict growth of flaws from the carbon film and penetrating into the substrate. The model can be applied to all brittle coatings where delamination of the coating is not observed. Conditions under which cracks in the carbon film propagate into the substrate were investigated using a recently developed superposition scheme. Possible methods of crack arrest will be discussed.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Srinath S Chakravarthy and Wilson S. K. Chiu "A model for inert strength reduction in carbon-coated optical fibers", Proc. SPIE 5465, Reliability of Optical Fiber Components, Devices, Systems, and Networks II, (10 September 2004); https://doi.org/10.1117/12.546040
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Carbon

Mechanics

Interfaces

Optical coatings

Thin films

Glasses

RELATED CONTENT

Aging behavior of optical fibers in aqueous environments
Proceedings of SPIE (September 10 2004)
Analysis of the local stress field in a composite material...
Proceedings of SPIE (September 13 1994)
C60 thin films for optical fiber coating applications
Proceedings of SPIE (December 29 2004)
Visible Anti-Reflection Coatings And Their Use
Proceedings of SPIE (March 01 1974)

Back to Top