Paper
16 February 2004 Characteristics of multilayer bender actuator using two piezoelectric ceramics
Soon-Jong Jeong, Dong-Man Lee, Mun-Su Ha, Dae-Su Lee, Jae-Sung Song
Author Affiliations +
Proceedings Volume 5648, Smart Materials III; (2004) https://doi.org/10.1117/12.581896
Event: Smart Materials, Nano-, and Micro-Smart Systems, 2004, Sydney, Australia
Abstract
The goal of this research is to design and evaluate a mutlilayer bender actuator, on a concept that each ceramic layer has different value of piezoelectric d31 coefficient. By stacking the ceramic layers with the different piezoelectric d31 coefficient, the internal stress within the actuator body became maximized. Three type actuators (called as sample 1, 2 and 3) were presented in a specification of stacking ceramic layers with low and high piezoelectric properties. Sample 1 was actuator with high piezoelectricity (d31 = -210pC/N), Sample 2 with low and high piezoelectricities (d31=-100 and -210 pC/N) ), and Sample 3 with low piezoelectricity (d31=-100 pC/N). Sample 2 exhibited higher displacement than the other samples under application of a voltage over 50 V, due to higher internal stress between the top and bottom layers. In addition, high generative force can be expected at the multilayer structure actuator, sample 2, with the two piezoelectric components over actuator with one component.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Soon-Jong Jeong, Dong-Man Lee, Mun-Su Ha, Dae-Su Lee, and Jae-Sung Song "Characteristics of multilayer bender actuator using two piezoelectric ceramics", Proc. SPIE 5648, Smart Materials III, (16 February 2004); https://doi.org/10.1117/12.581896
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Ceramics

Ferroelectric materials

Dielectric polarization

Electrodes

Dielectrics

Digital video discs

Back to Top