Paper
6 May 2005 Layout compensation for EUV flare
Author Affiliations +
Abstract
Flare has been noted as a significant concern for Extreme Ultraviolet (EUV) Lithography. Recent results on prototype tools have shown flare on the order of 40% in extreme cases. This is far from the ideal result. Flare compensation for EDA software tools such as Mentor Graphics’ Calibre RET Suite has been developed, and can be used to compensate density dependent fluctuations in conventional DUV lithography. This can be as simple as making corrections using rules for the variations of isolated and dense lines in an environment with prescribed flare, or a more complex correction incorporating flare into model-based OPC. Flare in EUV systems, however, has been shown to be non-uniform, with complex variations. In this presentation, we describe this flare correction technique and explore the correction of typical IC layouts that would be required to compensate for reported EUV flare values.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Franklin M. Schellenberg, James Word, and Olivier Toublan "Layout compensation for EUV flare", Proc. SPIE 5751, Emerging Lithographic Technologies IX, (6 May 2005); https://doi.org/10.1117/12.599999
Lens.org Logo
CITATIONS
Cited by 23 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical proximity correction

Extreme ultraviolet

Lithography

Point spread functions

Visualization

Extreme ultraviolet lithography

EUV optics

RELATED CONTENT

Writing time estimation of EB mask writer EBM 9000 for...
Proceedings of SPIE (October 17 2014)
The future of EUV lithography enabling Moore's Law in...
Proceedings of SPIE (March 27 2017)
Proposal of using EUVL for PXL
Proceedings of SPIE (December 06 2004)
EUV flare correction for the half-pitch 22nm node
Proceedings of SPIE (March 20 2010)
Comprehensive EUV lithography model
Proceedings of SPIE (March 29 2011)
Accurate models for EUV lithography
Proceedings of SPIE (September 23 2009)

Back to Top