Paper
3 November 2005 Nitrogen stress measurement of rape based on charged coupled device imaging sensor
Lei Feng, Yong He, Zheyan Zhu, Min Huang
Author Affiliations +
Proceedings Volume 6043, MIPPR 2005: SAR and Multispectral Image Processing; 604307 (2005) https://doi.org/10.1117/12.652402
Event: MIPPR 2005 SAR and Multispectral Image Processing, 2005, Wuhan, China
Abstract
Site-specific variable nitrogen application is one of the major precision crop production management operations. To obtain sufficient crop nitrogen stress information is essential for achieving effective site-specific nitrogen applications. This paper presents the development of a multi-spectral nitrogen deficiency sensor, which uses three channels (green, red, near-infrared) of crop images to determine nitrogen level of the rape. This sensor assess the nitrogen stress by means of the estimated SPAD value of the rape based on rape canopy reflectance sensed using three channels (green, red, near-infrared) of the multispectral camera. The core of this investigation is the calibration methods between the multi-spectral references and the nitrogen levels in crops measured using a SPAD 502 chlorophyll meter. Based on the results obtained from this study (The correlation was 0.89.), it can be concluded that a multi-spectral CCD camera can provide sufficient information to perform reasonable SPAD values estimation on-the-go during field operations.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lei Feng, Yong He, Zheyan Zhu, and Min Huang "Nitrogen stress measurement of rape based on charged coupled device imaging sensor", Proc. SPIE 6043, MIPPR 2005: SAR and Multispectral Image Processing, 604307 (3 November 2005); https://doi.org/10.1117/12.652402
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Nitrogen

Near infrared

Cameras

Calibration

Sensors

Image processing

Back to Top