Paper
20 April 2006 Correlation method for testing optical surfaces
Jiri Novak, Antonin Miks
Author Affiliations +
Proceedings Volume 6158, Lightmetry and Light and Optics in Biomedicine 2004; 61580J (2006) https://doi.org/10.1117/12.675776
Event: Lightmetry and Light and Optics in Biomedicine 2004, 2004, Warsaw, Poland
Abstract
Our paper describes a relatively simple method for testing a general shape of optical surfaces (i.e. flat, spherical or aspherical surfaces). The aim of this work is to propose a simple evaluation method that will enable to speed up the testing process of optical surfaces. The proposed method does not require to make a detail analysis of the interference field, i.e. determination of the shape and orders of interference fringes as it is necessary with existing interferometric methods. The deviation of the tested surface from its nominal shape is characterized by a correlation coefficient between the tested wave field and reference wave field that corresponds to the nominal shape of surface. By minimization of the correlation coefficient, one can obtain information about the deviation of the tested optical surface from its nominal shape. The evaluation method is universal and can be used for testing flat, spherical or aspherical optical surfaces.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiri Novak and Antonin Miks "Correlation method for testing optical surfaces", Proc. SPIE 6158, Lightmetry and Light and Optics in Biomedicine 2004, 61580J (20 April 2006); https://doi.org/10.1117/12.675776
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical testing

Spherical lenses

Optical components

Optical fabrication

Tolerancing

Interferometry

Optical fabrication equipment

Back to Top