A hybrid 3D sensor (NEPTEC TriDAR) for object tracking and inspection

X. Zhu; I. C. Smith; F. Babin

doi:10.1117/12.664716

19 May 2006 A hybrid 3D sensor (NEPTEC TriDAR) for object tracking and inspection

X. Zhu, I. C. Smith, F. Babin

Proceedings Volume 6214, Laser Radar Technology and Applications XI; 621407 (2006) https://doi.org/10.1117/12.664716
Event: Defense and Security Symposium, 2006, Orlando (Kissimmee), Florida, United States

Abstract

Although laser ranging and scanning sensors are widely used in a variety of industries, a sensor designed for spacecraft operations, including autonomous rendezvous, inspection and servicing remains a challenge. This is primarily due to critical requirements, including the need to have simultaneous high sampling speed, and good range and lateral resolution at both short range of a few meters and at long range of a few hundred meters. A typical LIDAR sensor is not suitable for tracking at the close-in distance, just before rendezvous, or during a critical close-up inspection, since its range resolution is in the tens of millimeters and can only be improved by averaging at the expense of speed. A laser triangulation sensor is capable of simultaneously having both high range resolution (~1mm) and high speed (~10kHz) at short distance. But the range resolution of a triangulation sensor reduces rapidly as range increases, its performance is inferior compared to a LIDAR based sensor at long range. NEPTEC TriDAR (triangulation + LIDAR) is a hybrid sensor that combines a triangulation sensor and a TOF sensor for spacecraft autonomous rendezvous and inspection. It has been developed in part from technology used in NEPTEC's OBSS (Orbiter Boom Sensor System) 3D laser camera. The OBSS LCS was used for inspection of the Shuttle tiles on STS-114. In this paper, the TriDAR design that combines triangulation and LIDAR to produce high speed and high resolution for both short and long range is described. To successfully produce this sensor for space, an athermalized optical steering system shared by the two sensors has been developed. Results from performance testing of a prototype, designed for autonomous rendezvous, are given.

Citation Download Citation

X. Zhu, I. C. Smith, and F. Babin "A hybrid 3D sensor (NEPTEC TriDAR) for object tracking and inspection", Proc. SPIE 6214, Laser Radar Technology and Applications XI, 621407 (19 May 2006); https://doi.org/10.1117/12.664716

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available