Paper
21 September 2006 Thermal analysis of multichip LED packages
Lan Kim, Jonghwa Choi, Sunho Jang, Moo Whan Shin
Author Affiliations +
Proceedings Volume 6355, Advanced LEDs for Solid State Lighting; 63550E (2006) https://doi.org/10.1117/12.691560
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
Thermal transient measurements of high power GaN-based LEDs with multi-chip designs are presented and discussed. Once transient cooling curve was obtained, the structure function theory was applied to determine the thermal resistance of packages. The measured total thermal resistances from junction to ambient were 19.87 K/W, 10.78 K/W, 6.77 K/W for the one-chip, two-chip and four-chip package, respectively. The contribution of each component to the total thermal resistance of the package can be calculated from the cumulative structure function and differential structure function. The total thermal resistance of multi-chip package is found to decrease with the number of chips due to parallel heat dissipation. Very useful thermal design rule for high power multi-chip LED package is analogized from the experiments. It was found that the effect of the number of chips in a package on the thermal resistance depends on the ratio of partial thermal resistance of chip and that of slug. Thermal resistance for full color multi chip LEDs, where each chip is driven independently, was measured as well and the implication was discussed.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lan Kim, Jonghwa Choi, Sunho Jang, and Moo Whan Shin "Thermal analysis of multichip LED packages", Proc. SPIE 6355, Advanced LEDs for Solid State Lighting, 63550E (21 September 2006); https://doi.org/10.1117/12.691560
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Resistance

Temperature metrology

Thermal analysis

Calibration

Sensors

Gallium nitride

RELATED CONTENT

Characterization of quartz-based package for RF MEMS
Proceedings of SPIE (May 17 2013)
White LED performance
Proceedings of SPIE (October 20 2004)
Thermal analysis of wafer-level LED packages with multichips
Proceedings of SPIE (September 26 2007)
Thermal analysis and design of high power LED packages and...
Proceedings of SPIE (September 12 2006)
Estimating the junction temperature of AC LEDs
Proceedings of SPIE (August 18 2010)

Back to Top