Paper
14 March 2007 Amplified pixel sensor architectures for low dose computed tomography using silicon thin film technology
Author Affiliations +
Abstract
Cone beam computed tomography (CBCT) has been recently reported using flat panel imagers (FPI). Here, detector technology capable of high speed imaging, high spatial resolution, large volume coverage, better contrast resolution and, in particular, lowered patient dose is required. Employing active matrix flat panel imagers (AMFPIs) as cone beam CT detectors has been proposed as a solution for improving volume coverage, contrast and resolution; however, clinical evaluations have shown that they suffer from low speed read out. Unlike passive pixel architecture which is currently the state-of-the-art technology for AMFPIs, our preliminary studies have shown that novel amplified pixel sensor (APS) architectures can overcome the low readout speed, and moreover, they provide gain which can be traded for higher frame rate and lower X-ray doses. Although APS architectures can meet the high dynamic range and low noise requirements of CT imaging, linearity and variations between pixel characteristics are major issues. In this study we will investigate novel APS architectures to address these concerns.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Taghibakhsh and K. S. Karim "Amplified pixel sensor architectures for low dose computed tomography using silicon thin film technology", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65103W (14 March 2007); https://doi.org/10.1117/12.710147
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Imaging systems

X-rays

Amplifiers

Silicon films

Amorphous silicon

Switches

RELATED CONTENT


Back to Top