Benefit of ArF immersion lithography in 55 nm logic device manufacturing

Takayuki Uchiyama; Takao Tamura; Kazuyuki Yoshimochi; Paul Graupner; Hans Bakker; Eelco van Setten; Kenji Morisaki

doi:10.1117/12.711054

26 March 2007 Benefit of ArF immersion lithography in 55 nm logic device manufacturing

Takayuki Uchiyama, Takao Tamura, Kazuyuki Yoshimochi, Paul Graupner, Hans Bakker, Eelco van Setten, Kenji Morisaki

Proceedings Volume 6520, Optical Microlithography XX; 652009 (2007) https://doi.org/10.1117/12.711054
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

In this paper we demonstrate the many benefits of using immersion lithography that go beyond depth of focus (DOF) improvement by comparing several key features of dry and immersion lithography. Immersion lithography improves critical dimension uniformity (CDU) as well as avoiding the necessity for strong resolution enhancement techniques (RET) as compared with dry lithography. Thus it is possible to significantly reduce the burden of optical proximity correction (OPC) work with immersion lithography. With respect to imaging, we studied the sensitivity of the lithographic performances to aberrations and light source spectral bandwidth E95 fluctuations to highlight the benefits of immersion lithography. The significant improvements that have been seen in the last year in overlay accuracy, defect control and focus & leveling accuracy have been considered to be challenges to the realization of immersion lithography in mass production. Now these challenges have been met for the manufacturing requirements of 55 nm logic devices. The achievements of immersion lithography include overlay accuracy within 10 nm on resist-to-resist wafers and within 20 nm on production wafers, fewer than 10 defects per wafer, and errors of less than 40 nm in focus & leveling on full wafers. We have established a top-coat resist process. In conclusion, immersion lithography is the most promising manufacturing solution for 55 nm node logic devices, providing advantages in CDU control, and equivalent overlay performance and focus & leveling accuracy to dry ArF, without an increased level of defects. NEC Electronics has completed development and preproduction of the 55 nm logic device "UX7LS" using immersion lithography and has established the lithography technology for mass production of the UX7LS this year.

Citation Download Citation

Takayuki Uchiyama, Takao Tamura, Kazuyuki Yoshimochi, Paul Graupner, Hans Bakker, Eelco van Setten, and Kenji Morisaki "Benefit of ArF immersion lithography in 55 nm logic device manufacturing", Proc. SPIE 6520, Optical Microlithography XX, 652009 (26 March 2007); https://doi.org/10.1117/12.711054

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Immersion lithography

Logic devices

Semiconducting wafers

Lithography

Monochromatic aberrations

Overlay metrology

Lithographic illumination

Show All Keywords

Keywords/Phrases

Search In:

Publication Years