Paper
14 November 2007 Design of dual-FOV refractive/diffractive LWIR optical system
Jian-ping Zhang, Ling-jie Wang, Xin Zhang
Author Affiliations +
Proceedings Volume 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 67223U (2007) https://doi.org/10.1117/12.783556
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
An infrared-optical zoom system using binary element is proposed in this paper. The two main advantages of the zoom system introducing here are: bigger F-number and lower cost. The primary optical properties are: F/#=1,zoom ratio =1:4,and dual field are 26.6°and 5.6°respectively. Wider field of view is used for search and the smaller one is used for imaging details. This system uses un-cooled infrared detector with 320×240 pixels and 45μm pixel size. The F-number matches the sensitivity range of the detector array. Three aspects are considered during design process to make the system more satisfactory and more achievable. First, the manner of zoom is accomplished by exchanging tow lenses into the smaller field of view system layout. The lens exchange manner faces the requirement of simple system structure and good image quality in both focal points. It can also make the system more feasible in the alignment process than mechanical-zooming manner and optical-zooming manner; Second, binary element is used to correct the chromatical aberration by taking the advantage of negative dispersion characteristics and the cost of the system is lower than that of conventional ones with Zinc Selenide (Znse) material at the same level. In the binary element is rotational symmetric with one step which is easy to fabricate; Others, in order to balance 5th spherical aberration, 5th coma aberration and 5th astigmatic aberration, high-order asphere surfaces with 2th order to 10thorder are also hired in the system. Asphere surface is useful in compressing the system and improving optical system transmittance. This kind asphere surface is on industrial level featuring low cost and easy to fabricate. It is shown that good image quality can achieved by implementing five Germanium lenses and the transmittance of system is 72%. All aberrations are diffraction-limited, both spherical aberration and astigmatic aberration are corrected. When the field of view(FOV) is 26.6°and the focal length is 152mm, MTF at Nyquist frequency(11lp/mm) is great than 0.7. The spherical aberration is -0.0073. The coma aberration is 0.0978 and the astigmatic aberration is -0.013. When the field of view(FOV) is 5.6°and the focal length is 38mm, MTF at Nyquist frequency is great than 0.8 with spherical aberration -0.0046,the coma aberration 0.055 and astigmatic aberration 0.034.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jian-ping Zhang, Ling-jie Wang, and Xin Zhang "Design of dual-FOV refractive/diffractive LWIR optical system", Proc. SPIE 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 67223U (14 November 2007); https://doi.org/10.1117/12.783556
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Imaging systems

Colorimetry

Long wavelength infrared

Modulation transfer functions

Optical components

Zoom lenses

RELATED CONTENT

Design of a spectral zoom imaging system
Proceedings of SPIE (March 12 2020)
A miniaturized camera objective with 2X optical zoom
Proceedings of SPIE (February 22 2018)
A new method for compact zoom lens design
Proceedings of SPIE (July 24 2018)
A compact and cost effective design for cell phone zoom...
Proceedings of SPIE (September 18 2007)

Back to Top